Woodgrain Aluminium Battens in Scarborough
For Scarborough builders and owners who want the timber look without the timber maintenance cycle.
Woodgrain Aluminium Battens in Scarborough
Summer in Scarborough is dry, hot and bright - good living, hard on timber. Oil-finished boards bleach and check under that UV load, and the milder, wetter winter then works into every crack. woodgrain aluminium battens in woodgrain aluminium avoids the whole cycle: the finish is engineered for UV stability and the board itself cannot dry out or split.
Being near the coast changes the specification, not just the view. Salt air around Scarborough corrodes unprotected steel and pulls the colour out of natural timber; marine-grade aluminium resists both, so the batten screen keeps its grain and tone with no re-oiling and no rust treatment.
Delivery to Scarborough is a standard metro run for us. Send through the drawings or measurements and the quote comes back in AUD with freight to site included as its own line.
Why woodgrain aluminium suits Scarborough
Stays perfectly straight
Extruded aluminium will not bow, twist or cup the way timber battens do once they are exposed to sun and rain.
Consistent shadow lines
Uniform sections and accurate spacing give you the clean, repeating lines that make a batten screen look architect-designed.
Privacy with airflow
Adjust batten width and gap to balance privacy and cross-ventilation - ideal for Australian outdoor living.
Non-combustible substrate
Aluminium battens suit bushfire-prone settings and buildings with combustibility requirements.
Lightweight spans
Lighter sections span further with fewer supports, simplifying screens, pergolas and ceilings.
Maintenance-free finish
No annual oiling. The baked woodgrain finish just needs an occasional wash.
Built for the Mediterranean climate
In Scarborough, you can expect hot, dry summers and mild, wetter winters. Because our products are aluminium rather than wood, the finish shrugs off UV and never needs re-oiling between seasons.
The sublimated woodgrain finish is baked into an architectural powder coat and stays UV-stable through the strongest sun Western Australia can throw at it, so your Scarborough batten screen keeps its timber look with no oiling, staining or repainting - just an occasional wash.
Where Scarborough projects use it
- Privacy screens and fencing infill
- Ceiling and soffit linings
- Facade blades and sun screening
- Feature walls and entry statements
- Pergolas, breezeways and patios
- Room dividers and commercial fitouts
Battens specifications
| Material | Extruded marine-grade aluminium |
|---|---|
| Finish | Sublimated woodgrain over powder coat |
| Common sizes | Range of square and rectangular sections |
| Fixing | Concealed clip and channel systems |
| Fire rating | Non-combustible substrate (AS 1530.1) |
| Maintenance | Occasional wash with mild detergent |
Finishes available in Scarborough
Every Woodonali finish is available across Scarborough and the Greater Perth.
Spotted Gum
warm mid-brown with subtle grey and chocolate streaks
View finish ›
Blackbutt
pale golden-brown with a fine, even grain
View finish ›
Western Red Cedar
rich reddish-brown with soft, straight grain
View finish ›
Tasmanian Oak
soft straw-blonde with a clean, consistent grain
View finish ›
Jarrah
deep red to rich russet brown
View finish ›
Merbau
warm reddish-brown with darker flecks
View finish ›
Walnut
deep chocolate brown with flowing grain
View finish ›
Teak
golden honey-brown with a fine grain
View finish ›Quotes for Scarborough projects
Send the rough coverage in m² (or the lengths you need) and your Scarborough postcode. We come back with an AUD figure that includes freight to Scarborough, usually within one business day.
Rather talk first? Call 1300 966 388 - we deal with Western Australia owners, builders and architects every week.
Get a Scarborough quote
Battens in Scarborough: common questions
- Does it need re-oiling between seasons?
- No. There is no oil in the system at all. The finish is baked on, so the after-summer maintenance that timber demands is simply not part of owning it.
- How does it handle the wetter winter after a dry summer?
- That swing from dry heat to winter rain is exactly what opens timber up. Aluminium is non-porous and dimensionally stable, so the winter wet finds no cracks to enter and causes no movement.
- How close to the water can it be installed?
- The marine-grade alloy suits genuine coastal exposure. For front-line positions we confirm fixings and detailing per project, because the fasteners and flashings matter as much as the board.
- Will the battens fade in the Australian sun?
- The sublimated finish is engineered for UV stability, so the woodgrain holds its colour far longer than oiled or stained timber.
- Are battens available for bushfire areas?
- The aluminium substrate is non-combustible. We can discuss detailing for your BAL requirements.
- What batten spacing should I use for privacy?
- Closer spacing gives more privacy and shade; wider spacing lets more light and breeze through. We can help you model the right gap for your aspect and sightlines.
- Can battens be used on ceilings and soffits?
- Yes. Lightweight aluminium battens are popular for eaves, alfresco ceilings and feature soffits because they will not sag or rot in the weather.
Other products in Scarborough
More Western Australia areas we service
Planning a woodgrain aluminium project?
Talk to our Australian team for obligation-free advice, samples and pricing in AUD.