Woodgrain Aluminium Battens in Dunsborough
Give your Dunsborough project the warmth of timber without the upkeep, with a batten screen suited to the Mediterranean climate.
Woodgrain Aluminium Battens in Dunsborough
A Mediterranean climate gives a batten screen two jobs: shrug off months of dry heat and UV, then take a mild, wet winter without absorbing any of it. Solid timber struggles with both halves; woodgrain aluminium is troubled by neither - which is why Woodonali supplies woodgrain aluminium battens to homes, builders and architects around Dunsborough.
Being near the coast changes the specification, not just the view. Salt air around Dunsborough corrodes unprotected steel and pulls the colour out of natural timber; marine-grade aluminium resists both, so the batten screen keeps its grain and tone with no re-oiling and no rust treatment.
Dunsborough sits inside one of our regular delivery runs, so freight to site is a routine line in the AUD quote rather than an unknown.
Why woodgrain aluminium suits Dunsborough
Maintenance-free finish
No annual oiling. The baked woodgrain finish just needs an occasional wash.
Stays perfectly straight
Extruded aluminium will not bow, twist or cup the way timber battens do once they are exposed to sun and rain.
Consistent shadow lines
Uniform sections and accurate spacing give you the clean, repeating lines that make a batten screen look architect-designed.
Privacy with airflow
Adjust batten width and gap to balance privacy and cross-ventilation - ideal for Australian outdoor living.
Non-combustible substrate
Aluminium battens suit bushfire-prone settings and buildings with combustibility requirements.
Lightweight spans
Lighter sections span further with fewer supports, simplifying screens, pergolas and ceilings.
Built for the Mediterranean climate
In Dunsborough, you can expect hot, dry summers and mild, wetter winters. Because our products are aluminium rather than wood, the finish shrugs off UV and never needs re-oiling between seasons.
The sublimated woodgrain finish is baked into an architectural powder coat and stays UV-stable through the strongest sun Western Australia can throw at it, so your Dunsborough batten screen keeps its timber look with no oiling, staining or repainting - just an occasional wash.
Where Dunsborough projects use it
- Privacy screens and fencing infill
- Ceiling and soffit linings
- Facade blades and sun screening
- Feature walls and entry statements
- Pergolas, breezeways and patios
- Room dividers and commercial fitouts
Battens specifications
| Material | Extruded marine-grade aluminium |
|---|---|
| Finish | Sublimated woodgrain over powder coat |
| Common sizes | Range of square and rectangular sections |
| Fixing | Concealed clip and channel systems |
| Fire rating | Non-combustible substrate (AS 1530.1) |
| Maintenance | Occasional wash with mild detergent |
Finishes available in Dunsborough
Every Woodonali finish is available across Dunsborough and the South West.
Spotted Gum
warm mid-brown with subtle grey and chocolate streaks
View finish ›
Blackbutt
pale golden-brown with a fine, even grain
View finish ›
Western Red Cedar
rich reddish-brown with soft, straight grain
View finish ›
Tasmanian Oak
soft straw-blonde with a clean, consistent grain
View finish ›
Jarrah
deep red to rich russet brown
View finish ›
Merbau
warm reddish-brown with darker flecks
View finish ›
Walnut
deep chocolate brown with flowing grain
View finish ›
Teak
golden honey-brown with a fine grain
View finish ›Quotes for Dunsborough projects
Send the rough coverage in m² (or the lengths you need) and your Dunsborough postcode. We come back with an AUD figure that includes freight to Dunsborough, usually within one business day.
Rather talk first? Call 1300 966 388 - we deal with Western Australia owners, builders and architects every week.
Get a Dunsborough quote
Battens in Dunsborough: common questions
- Can the finish take long, dry summer heat?
- Yes. The powder-coated woodgrain is engineered for UV stability, and the aluminium underneath cannot dry out, crack or check the way oiled timber does over a hot, dry summer.
- How does it handle the wetter winter after a dry summer?
- That swing from dry heat to winter rain is exactly what opens timber up. Aluminium is non-porous and dimensionally stable, so the winter wet finds no cracks to enter and causes no movement.
- Will salt air corrode the boards?
- The substrate is marine-grade aluminium, specified for coastal exposure. It does not rust like steel, and a periodic fresh-water rinse keeps salt build-up from dulling the finish.
- Are battens available for bushfire areas?
- The aluminium substrate is non-combustible. We can discuss detailing for your BAL requirements.
- What batten spacing should I use for privacy?
- Closer spacing gives more privacy and shade; wider spacing lets more light and breeze through. We can help you model the right gap for your aspect and sightlines.
- Can battens be used on ceilings and soffits?
- Yes. Lightweight aluminium battens are popular for eaves, alfresco ceilings and feature soffits because they will not sag or rot in the weather.
- Will the battens fade in the Australian sun?
- The sublimated finish is engineered for UV stability, so the woodgrain holds its colour far longer than oiled or stained timber.
Other products in Dunsborough
More Western Australia areas we service
Planning a woodgrain aluminium project?
Talk to our Australian team for obligation-free advice, samples and pricing in AUD.