Aluminium Privacy Screens in Hobart
woodgrain aluminium privacy screens supplied across the Greater Hobart, with honest AUD quotes and freight to Hobart included.
Aluminium Privacy Screens in Hobart
Cold winters and a damp climate make Hobart honest territory for judging an external material. Oiled and painted timber needs constant attention here; woodgrain aluminium does not, because frost and moisture cannot get into the board. That is the case for a Woodonali screen across the Greater Hobart.
Hobart is coastal, so salt is part of the brief. We use marine-grade aluminium for exactly this exposure: it does not rust the way steel does, and it does not grey off and weather the way oiled timber does by the sea. A periodic fresh-water rinse clears salt build-up and keeps the finish doing its job.
Delivery to Hobart is a standard metro run for us. Send through the drawings or measurements and the quote comes back in AUD with freight to site included as its own line.
Why woodgrain aluminium suits Hobart
Made to measure
Screens are fabricated to your openings, boundary heights and fixing conditions for a tailored finish.
Privacy plus ventilation
Tune batten gaps to block sightlines while keeping air moving through outdoor areas.
Coastal and UV ready
Marine-grade alloy and a baked finish handle salt air and strong sun without corroding or fading.
Non-combustible
An aluminium substrate suits bushfire-prone boundaries and compliant builds.
Lightweight and strong
Screens stay rigid over wide spans without the bulk of timber framing.
No upkeep
No staining or sealing - just an occasional wash.
Built for the cool-temperate climate
In Hobart, you can expect cold winters, crisp air, frost and reliable rainfall. Because our products are aluminium rather than wood, damp and frost get no grip, so there is no rot and nothing to repaint.
The sublimated woodgrain finish is baked into an architectural powder coat and stays UV-stable through the strongest sun Tasmania can throw at it, so your Hobart screen keeps its timber look with no oiling, staining or repainting - just an occasional wash.
Where Hobart projects use it
- Boundary and neighbour privacy screens
- Pool equipment and bin screening
- Air-conditioner and services concealment
- Courtyard and balcony dividers
- Front fences and gates
- Outdoor room and alfresco enclosure
Privacy Screens specifications
| Material | Marine-grade aluminium battens and frames |
|---|---|
| Finish | Sublimated woodgrain over powder coat |
| Configuration | Made-to-measure panels and gates |
| Fixing | Posts, channels and concealed fixings |
| Fire rating | Non-combustible substrate (AS 1530.1) |
| Maintenance | Occasional wash with mild detergent |
Finishes available in Hobart
Every Woodonali finish is available across Hobart and the Greater Hobart.
Spotted Gum
warm mid-brown with subtle grey and chocolate streaks
View finish ›
Blackbutt
pale golden-brown with a fine, even grain
View finish ›
Western Red Cedar
rich reddish-brown with soft, straight grain
View finish ›
Tasmanian Oak
soft straw-blonde with a clean, consistent grain
View finish ›
Jarrah
deep red to rich russet brown
View finish ›
Merbau
warm reddish-brown with darker flecks
View finish ›
Walnut
deep chocolate brown with flowing grain
View finish ›
Teak
golden honey-brown with a fine grain
View finish ›Quotes for Hobart projects
Send the rough coverage in m² (or the lengths you need) and your Hobart postcode. We come back with an AUD figure that includes freight to Hobart, usually within one business day.
Rather talk first? Call 1300 966 388 - we deal with Tasmania owners, builders and architects every week.
Get a Hobart quote
Privacy Screens in Hobart: common questions
- Will frost and persistent damp damage the boards?
- No. There is nothing for frost or damp to soak into - the board is non-porous aluminium. The back-face rot and moss-driven decay that damp climates cause in timber cannot occur.
- Does it need repainting in a cool, wet climate?
- No. The woodgrain finish is baked on and engineered for exterior exposure. The repaint cycle that timber needs in a damp climate is replaced by an occasional wash.
- What maintenance does a coastal installation need?
- A fresh-water wash on a regular basis - more often the closer you are to the surf - to rinse salt off. There is no re-oiling, no rust treatment and no greying to sand back.
- How high can a privacy screen be?
- Screen heights are made to suit your needs, but local council and fencing rules may apply on boundaries. We can build to the height your project allows.
- Can screens double as a gate?
- Yes. Matching gates are a common addition so the whole boundary reads as one continuous timber-look line.
- Do they suit coastal properties?
- Marine-grade aluminium is ideal near the coast where salt air corrodes steel and weathers timber quickly.
- How private are they?
- That is set by batten width and spacing. Tighter spacing blocks more of the view; we can spec the right balance for your sightlines.
Other products in Hobart
Planning a woodgrain aluminium project?
Talk to our Australian team for obligation-free advice, samples and pricing in AUD.