Aluminium Facade Systems in Kingston
Bringing the warmth of timber to Kingston homes - in non-combustible aluminium that never needs oiling, staining or sanding back.
Aluminium Facade Systems in Kingston
Cold winters and a damp climate make Kingston honest territory for judging an external material. Oiled and painted timber needs constant attention here; woodgrain aluminium does not, because frost and moisture cannot get into the board. That is the case for a Woodonali facade across the Greater Hobart.
Being near the coast changes the specification, not just the view. Salt air around Kingston corrodes unprotected steel and pulls the colour out of natural timber; marine-grade aluminium resists both, so the facade keeps its grain and tone with no re-oiling and no rust treatment.
Delivery to Kingston is a standard metro run for us. Send through the drawings or measurements and the quote comes back in AUD with freight to site included as its own line.
Why woodgrain aluminium suits Kingston
Lighter, faster builds
Aluminium reduces dead load and installs faster than masonry or solid timber facades.
Designed for Australian sun
UV-stable finishes hold their colour across exposed elevations.
Long-term value
Minimal maintenance and a durable finish lower the lifetime cost of the facade.
Design flexibility
Mix board widths, batten depths and orientations to model light and shadow.
NCC-minded specification
Non-combustible substrate helps facades meet combustibility requirements for class 2-9 buildings.
Whole-building coordination
Cladding, battens, soffits and trims in matching woodgrain finishes for a unified facade.
Built for the cool-temperate climate
In Kingston, you can expect cold winters, crisp air, frost and reliable rainfall. Because our products are aluminium rather than wood, damp and frost get no grip, so there is no rot and nothing to repaint.
The sublimated woodgrain finish is baked into an architectural powder coat and stays UV-stable through the strongest sun Tasmania can throw at it, so your Kingston facade keeps its timber look with no oiling, staining or repainting - just an occasional wash.
Where Kingston projects use it
- Multi-residential and apartment facades
- Commercial and retail buildings
- Architectural homes and renovations
- Mixed-use developments
- Hospitality and tourism projects
- Public and institutional buildings
Facades specifications
| Material | Marine-grade aluminium cladding and battens |
|---|---|
| Finish | Sublimated woodgrain over architectural powder coat |
| Fire rating | Non-combustible substrate (AS 1530.1) |
| Systems | Board cladding, batten blades, soffits, trims |
| Documentation | Specifications and details for design teams |
| Warranty | Finish warranty (project dependent) |
Finishes available in Kingston
Every Woodonali finish is available across Kingston and the Greater Hobart.
Spotted Gum
warm mid-brown with subtle grey and chocolate streaks
View finish ›
Blackbutt
pale golden-brown with a fine, even grain
View finish ›
Western Red Cedar
rich reddish-brown with soft, straight grain
View finish ›
Tasmanian Oak
soft straw-blonde with a clean, consistent grain
View finish ›
Jarrah
deep red to rich russet brown
View finish ›
Merbau
warm reddish-brown with darker flecks
View finish ›
Walnut
deep chocolate brown with flowing grain
View finish ›
Teak
golden honey-brown with a fine grain
View finish ›Quotes for Kingston projects
Send the rough coverage in m² (or the lengths you need) and your Kingston postcode. We come back with an AUD figure that includes freight to Kingston, usually within one business day.
Rather talk first? Call 1300 966 388 - we deal with Tasmania owners, builders and architects every week.
Get a Kingston quote
Facades in Kingston: common questions
- Will frost and persistent damp damage the boards?
- No. There is nothing for frost or damp to soak into - the board is non-porous aluminium. The back-face rot and moss-driven decay that damp climates cause in timber cannot occur.
- Is aluminium suitable for cold winters?
- Yes. Aluminium performs consistently across the temperature range, with small, predictable movement. Cold does not embrittle the finish, and there is no freeze-and-thaw moisture cycling because the board absorbs no water.
- What maintenance does a coastal installation need?
- A fresh-water wash on a regular basis - more often the closer you are to the surf - to rinse salt off. There is no re-oiling, no rust treatment and no greying to sand back.
- Are these facade systems NCC compliant?
- The aluminium substrate is non-combustible to AS 1530.1. Compliance is assessed on the complete wall system, and we can supply documentation to support your certifier.
- Can you match a whole building in one finish?
- Yes. Cladding, battens, soffits and trims can all be supplied in the same woodgrain finish for a seamless facade.
- Do you support architects and builders with documentation?
- We provide product specifications and detailing to help design teams and estimators.
- How does it compare with composite panel?
- Solid aluminium woodgrain avoids the combustible core issues associated with some composite panels, while still delivering a refined timber look.
Other products in Kingston
More Tasmania areas we service
Planning a woodgrain aluminium project?
Talk to our Australian team for obligation-free advice, samples and pricing in AUD.