Woodgrain Aluminium Battens in Bunbury
For Bunbury builders and owners who want the timber look without the timber maintenance cycle.
Woodgrain Aluminium Battens in Bunbury
Long, hot, dry summers with serious UV are what bleach and crack an oiled timber finish - it dries out, checks, and asks for another coat every year or two. That is the weather Bunbury and the South West serve up most years, and it is why Woodonali supplies woodgrain aluminium battens here in aluminium: the woodgrain is baked into a UV-stable powder coat, so it neither dries nor fades, and it never needs re-oiling.
Bunbury is coastal, so salt is part of the brief. We use marine-grade aluminium for exactly this exposure: it does not rust the way steel does, and it does not grey off and weather the way oiled timber does by the sea. A periodic fresh-water rinse clears salt build-up and keeps the finish doing its job.
Bunbury is a regional delivery, and we treat the freight honestly: it is calculated for your site and included in the AUD quote up front, not added after you have committed.
Why woodgrain aluminium suits Bunbury
Stays perfectly straight
Extruded aluminium will not bow, twist or cup the way timber battens do once they are exposed to sun and rain.
Consistent shadow lines
Uniform sections and accurate spacing give you the clean, repeating lines that make a batten screen look architect-designed.
Privacy with airflow
Adjust batten width and gap to balance privacy and cross-ventilation - ideal for Australian outdoor living.
Non-combustible substrate
Aluminium battens suit bushfire-prone settings and buildings with combustibility requirements.
Lightweight spans
Lighter sections span further with fewer supports, simplifying screens, pergolas and ceilings.
Maintenance-free finish
No annual oiling. The baked woodgrain finish just needs an occasional wash.
Built for the Mediterranean climate
In Bunbury, you can expect hot, dry summers and mild, wetter winters. Because our products are aluminium rather than wood, the finish shrugs off UV and never needs re-oiling between seasons.
The sublimated woodgrain finish is baked into an architectural powder coat and stays UV-stable through the strongest sun Western Australia can throw at it, so your Bunbury batten screen keeps its timber look with no oiling, staining or repainting - just an occasional wash.
Where Bunbury projects use it
- Privacy screens and fencing infill
- Ceiling and soffit linings
- Facade blades and sun screening
- Feature walls and entry statements
- Pergolas, breezeways and patios
- Room dividers and commercial fitouts
Battens specifications
| Material | Extruded marine-grade aluminium |
|---|---|
| Finish | Sublimated woodgrain over powder coat |
| Common sizes | Range of square and rectangular sections |
| Fixing | Concealed clip and channel systems |
| Fire rating | Non-combustible substrate (AS 1530.1) |
| Maintenance | Occasional wash with mild detergent |
Finishes available in Bunbury
Every Woodonali finish is available across Bunbury and the South West.
Spotted Gum
warm mid-brown with subtle grey and chocolate streaks
View finish ›
Blackbutt
pale golden-brown with a fine, even grain
View finish ›
Western Red Cedar
rich reddish-brown with soft, straight grain
View finish ›
Tasmanian Oak
soft straw-blonde with a clean, consistent grain
View finish ›
Jarrah
deep red to rich russet brown
View finish ›
Merbau
warm reddish-brown with darker flecks
View finish ›
Walnut
deep chocolate brown with flowing grain
View finish ›
Teak
golden honey-brown with a fine grain
View finish ›Quotes for Bunbury projects
Send the rough coverage in m² (or the lengths you need) and your Bunbury postcode. We come back with an AUD figure that includes freight to Bunbury, usually within one business day.
Rather talk first? Call 1300 966 388 - we deal with Western Australia owners, builders and architects every week.
Get a Bunbury quote
Battens in Bunbury: common questions
- Can the finish take long, dry summer heat?
- Yes. The powder-coated woodgrain is engineered for UV stability, and the aluminium underneath cannot dry out, crack or check the way oiled timber does over a hot, dry summer.
- Does it need re-oiling between seasons?
- No. There is no oil in the system at all. The finish is baked on, so the after-summer maintenance that timber demands is simply not part of owning it.
- What maintenance does a coastal installation need?
- A fresh-water wash on a regular basis - more often the closer you are to the surf - to rinse salt off. There is no re-oiling, no rust treatment and no greying to sand back.
- Will the battens fade in the Australian sun?
- The sublimated finish is engineered for UV stability, so the woodgrain holds its colour far longer than oiled or stained timber.
- Are battens available for bushfire areas?
- The aluminium substrate is non-combustible. We can discuss detailing for your BAL requirements.
- What batten spacing should I use for privacy?
- Closer spacing gives more privacy and shade; wider spacing lets more light and breeze through. We can help you model the right gap for your aspect and sightlines.
- Can battens be used on ceilings and soffits?
- Yes. Lightweight aluminium battens are popular for eaves, alfresco ceilings and feature soffits because they will not sag or rot in the weather.
Other products in Bunbury
More Western Australia areas we service
Planning a woodgrain aluminium project?
Talk to our Australian team for obligation-free advice, samples and pricing in AUD.